 |
 |
|
Nothing is too much for this workhorse
- All-in-one: replaces assembly and wood glue, polyurethane adhesive, silicone sealant, sanitary silicone sealant, acrylate adhesive and butyl caulking.
- Can be used to glue, mount and seal everything.
- Bonds to nearly all materials, even to a damp substrate.
- Can be used anywhere: inside and out, in the kitchen and bathroom.
- Super strong, resilient and ready to be painted.
|

|
| With TEC7 the solution is always simple |
| |
- For all applications, as well in building, bathroom as in general maintenance TEC7 replaces: mounting, wood and P.U. adhesive, silicone sealants, sanitary silicone sealants, acrylic sealants, butyl rubber sealants.
- As universal adhesive TEC7 bonds to most surfaces and does not attack synthetic material.
- On mirrors (vertical strips), on natural stone (does not bleed through), polyester, polystyrene foam, wet surfaces, even under water.
- Repaintable with all common paints.
|
| |
| Flow |
5 bar / 3 mm / 23°C 140 g/min |
| Skin cure |
23°C 50% R.V. 8 minutes |
| Non-adhering |
23°C 50% R.V. 25 minutes |
| Full cure time |
23°C 50% R.V. 24u – 6 mm 48u – 7 mm 72u – 8 mm |
| E-Modulus 100% |
172N/cm2 / 1,72Mpa |
| Volume shrinkage after cure |
< 3 % |
| Hardness – DIN 53505 |
60 Shore A |
| Tensile strength |
265 N/cm2 / 2,65 Mpa |
| Tear strength – DIN 53507 |
140 N/cm2 / 1,40 Mpa |
| Thermal stability |
- 30°C till + 95°C / Peak: 155°C max. 30 min. |
| Elongation at rupture – DIN 53504 |
> 350 % |
| Non toxic |
|
| Chemical resistance |
good: water, seawater, aliphatic solvents, oils, greases, diluted organic acids, lyes moderate: esters, ketones, aromatics. bad: concentrated acids, chlorinated solvents, chlorine of swimming pools |
| Shelf life |
12 months |
|
| |
- Cut the tube at the nose.
- Cut off the nozzle at the desired dimension.
- Use a TECgun.
- Apply on a clean, degreased surface.
- Finish off the joints with TEC7- CLEANER.
|
| | | | |